6 Signs Of A Bad Powertrain Control Module & Replacement Cost (2023)

Whether you like it or not, your vehicle is filled to the brim with computers. While these computers are a dream come true when everything is working the way it should, they can quickly turn into a nightmare when circuits start to fail.

These computers rarely fail, and that’s lucky for everyone, because when they do, they’re expensive to replace. One of those magical computers is the Powertrain Control Module, and as the name implies, it controls everything in the powertrain.

In this comprehensive guide, we’ll break down everything you need to know about your PCM and what you need to do if it starts acting up. Let’s start with a look at the signs to look for.

Table Of Contents show

Symptoms Of A Bad Powertrain Control Module (PCM)

The most common symptoms of a bad PCM are poor engine performance and a check engine light on your dashboard. You may also notice problems with the transmission, like shifting issues. Poor fuel economy and increased emissions are also quite common.

While it’s not common for a PCM to break, it does happen from time to time. Before you jump straight to the PCM, though, rule out any other potential causes.

Here is a more detailed list of the signs of a bad or failing powertrain control module to look for:


1. A Check Engine Light

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (1)

The first sign that your PCM is having issues is likely going to be a check engine light. The light could be for anything related to the powertrain. Just keep in mind that the problem is more likely with the sensor, wiring, or just about anything else.

If your vehicle has a check engine light, rule out every other possible cause before jumping to the PCM. Check the trouble codes with an OBD2 scanner

2. Poor Performance

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (2)

Your PCM controls performance, so it makes sense that if it’s not responding correctly, performance will suffer. The more screwed up your PCM is, the more likely you’ll have multiple issues leading to poor performance.

However, if just a single part of your PCM isn’t working correctly, you may only have poor performance under certain conditions, like idling or accelerating.

Related: 8 Causes Why Your Car Won’t Accelerate

3. Problems Starting

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (3)

If your PCM problems get bad enough, you might not be able to get your vehicle started. At the very least, it might be hard to start, especially in colder conditions.

If your vehicle is having problems starting and it’s related to the PCM, it’s a pretty serious problem that you need to have looked at before you total your engine.

Related: 5 Causes of a Car Engine That Cranks But Won’t Start

4. Increased Emissions

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (4)

When everything is working correctly, your PCM minimizes your vehicle’s emissions by optimizing performance. When it’s not working the way it should, performance suffers, and you’ll likely have an increase in emissions. However, unless you’re taking your vehicle for an emission test, you probably won’t notice anything different.

(Video) Top 3 SYMPTOMS SIGNS OF A BAD ECM PCM TCM. What you need to look for when replacing one. P0601 P0505

5. Poor Fuel Economy

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (5)

If everything isn’t working correctly, it’s not surprising that your fuel economy will suffer as a result. For instance, you’ll need to accelerate more if your turbo isn’t generating enough boost because the PCM isn’t telling it to.

There are tons of examples like this, but with a faulty PCM, you’ll likely be wasting fuel.

6. Shifting Problems

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (6)

If your vehicle is having problems shifting into different gears, then the PCM might be the problem. Your PCM controls everything that both your engine and your transmission does. So, if you’re having any issues with your powertrain, you might be able to trace it back to the PCM.

If your vehicle is having problems shifting, it’s a severe condition that you need to have addressed immediately. Otherwise, your vehicle is going to handle erratically, which can quickly lead to an accident.

PCM Function

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (7)

The PCM is the brain of the power delivery unit in your engine. It controls various features, including ignition timing, fuel delivery, emissions, turbo boost pressure, idle speed, throttle control, and so much more.

While you might’ve heard of Transmission Control Module (TCM) or an Engine Control Module (ECM), a PCM controls both of those functions. So, if your vehicle has a PCM, it either houses both of those components in a single unit, or the one computer controls both functions.

The PCM controls all of these functions through a variety of sensors that communicates with it. It starts by sending a control out to an actuator and then measures the actual results through a sensor.

The PCM is programmed to tell each actuator what to do when specific commands are met – like when hit the throttle – and then it’s programmed to know what the acceptable readings are in response.

When something isn’t working correctly, it shoots a warning to the driver through a check engine light. It’s not an easy component to understand, and unless you have the proprietary software, it’s not a component you’re going to fix either.

(Video) Understanding Powertrain Control Modules

PCM Location

6 Signs Of A Bad Powertrain Control Module & Replacement Cost (8)

The PCM is most often located in the engine bay near the fuse box or inside the car near the fuse box. It can often also be located under the front windshield behind some covers.

There are a few different locations where the manufacturer can place your vehicle’s PCM, but the most common location is in the engine bay. The PCM doesn’t look like anything special – just a metal box with some wires coming out of it.

If your vehicle’s PCM isn’t in the engine bay, it might be inside the passenger compartment. While this location isn’t all that common, if it is there, it is typically underneath the passenger side dashboard – behind all the plastic coverings.

In the ultra-rare instance that your PCM isn’t in either of those locations, it might be in your vehicle’s trunk. This isn’t as common, since all of the wires from the engine will have to run to the vehicle’s rear to communicate with the PCM.

PCM Replacement Cost

The PCM is a computer, and computers aren’t cheap to replace. That’s why the average PCM replacement cost is anywhere between $800 and $1,500, depending on the car model and labor costs.

Even worse, this is almost all in the cost of the PCM itself. Labor typically only runs between $75 and $100. But if you think you can save yourself $100 and replace it yourself, think again.

That’s because you need to program the PCM to your specific vehicle, and unless you have the proprietary software to do it, you’ll need to take it to the dealership.

The good news is that the dealership will see if they can’t reprogram the PCM before replacing it. If you’re lucky, they’ll find an update and reprogram it for you, which generally only costs between $75 and $150.

PCM Testing

Frequently Asked Questions

Can a car run without a PCM?

No. A car can’t run without a PCM. The PCM (Powertrain Control Module) is responsible for monitoring and controlling all the engine’s and transmission operating parameters, including fuel delivery, ignition timing, and emissions controls. Without a PCM, your car won’t start.

How long does it take to fix a PCM?

Fixing a PCM isn’t something that most people can do. It really depends on the issue and how comfortable you are with computers. If it’s a simple software problem, it could take less than an hour. However, if it’s a hardware issue, it could take several hours or even require replacing the entire PCM.

How can I test my PCM?

Testing a PCM is very difficult to do unless you have a lot of experience with these kinds of things. What you can do is test if the PCM is getting voltage and ground with a multimeter, but other than that it’s better to leave it to the pros if you don’t know how to test it.

What is the difference between an ECM and a PCM?

An ECM, or engine control module, is a computer that controls the engine. A PCM, or powertrain control module, is a computer that controls the transmission and engine in order to optimize fuel economy and power. The two systems are similar, but the ECM focuses specifically on the engine while the PCM regulates both the engine and transmission.

(Video) The Trainer #121: Testing The Engine Control Module - Watch THIS Before You Order A Replacement!

(Video) Top 10 symptoms of a bad engine electronic control unit or control module

Categories:Electric, Engine


How do I know if my powertrain control module is bad? ›

When the PCM is not working correctly, the most common symptom is a lack of engine power, and the Check Engine Light illuminates on your dashboard. However, you may also notice poor fuel economy, increased emissions, and shifting problems.

What problems can a bad PCM cause? ›

What Are the Symptoms of a Bad PCM?
  • Vehicle won't start.
  • Engine performance problems.
  • Active check engine light or other warning lights.
  • Vehicle can't run emission monitors.
Aug 17, 2023

Will a bad PCM throw a code? ›

The PCM should give you a code for P0600 through P0606 indicating that the computer has a processor error. However, if the PCM is corrupt, then just like a desktop computer, there is no accessing anything and no codes are put out for the computer would have no way of sending a signal.

What happens when a control module goes out? ›

A complete ECM failure means no engine management for the vehicle. As a result, the car is not able to start as it's missing core inputs from the computer. Problems like this may not always be attributed to the ECM.

How do you know if you have a powertrain problem? ›

If you notice any difficulty shifting gears or you hear a screeching or whining noise, this could be an indication that your powertrain transmission is in need of repairs. Check the transmission fluid – If your transmission fluid is low or dirty, then you may experience issues with the powertrain.

What does the PCM fuse control? ›

The PCM is the power control module in a car. It's responsible for controlling the engine, transmission, and other components.

What is the code for the PCM engine? ›

The P0606 code relates to your engine's Powertrain Control Module (PCM) and its operability and state of condition. The PCM is the computer that assesses and controls all of your vehicle's vital components and systems; it is the brain behind your car.

How do you test a powertrain control module? ›

To test the PCM first check for loose connection and rust. Now check the battery voltage which must be greater than 13.6 volts when the engine is on and 12V when the engine is off. Now check for sensors and wire connected to the PCM. If everything is fine you need to replace PCM.

What is powertrain malfunction indicator? ›

Generally, this indicator light means a problem has been detected in the automatic transmission (not applicable in manual transmission cars) or transaxle.

What causes control module failure? ›

Possible Causes of Control Module Failure

Disintegrated connections between modules. Failing sensors. Especially high engine temperatures. Exposure to water or too much moisture.


1. Top 8 Symptoms and Causes of a Bad PCM
(Mechanical Boost)
(Peter L)
(Top 5 Auto Repairs)
4. 5 Symptoms Of A Bad Engine Control Module and Replacement Cost
5. Engine Control Module (ECM) Battery Fuse Replacement
6. How to Replace a Bad Computer in Your Car
(Scotty Kilmer)
Top Articles
Latest Posts
Article information

Author: Dan Stracke

Last Updated: 28/08/2023

Views: 6028

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.